From the anime series "Fafner in the Azure" comes the first ever plastic model of the Salvator Model Fafner Mark Sein! The mecha has been carefully recreated based on its appearance from the series. The model stands at 180m in height and faithfully recreates the unique joints of the mecha, allowing you to create all kinds of scenes and poses.
Two Luger Lances are included, and the Stabilizer on its back can be displayed in standard mode or light mode. The Luger Lances can also be displayed open or closed with the use of interchangeable parts. Crystal effect parts are also included to display the mecha assimilating as well. The model is made from ABS and PS plastic. Its various parts have been separated into 6 different colors of runners (white, gray, black, clear blue, clear green, silver), making it easy to recreate the robot from the series with a simple assembly.

The unique joints of the mecha have been faithfully recreated while maintaining a broad range of articulation.

Two Luger Lances are included.

Interchangeable parts to display the mecha in Weapon Assimilation Mode, Shooting Mode and Stabilizer Mode are included.

From the anime series "Hyper Combat Unit Dangaioh" comes a MODEROID plastic model of the giant robot piloted by four superhuman pilots, Dangaioh! With the use of interchangeable parts, both the Dan Mechanic mecha in flying mode before combining and the combined mecha Dangaioh can be recreated! The joints of the plastic model are articulated while in Dangaioh form, and interchangeable hand parts are included to recreated Dangaioh's Spiral Knuckleand Psychic Wave techniques.
In addition to interchangeable closed hands, weapon holding hands and open hands, the Dangaioh sword is included as well. Parts are separated into 4 different colored runners (white, blue, gray, red) and pre-painted parts, making is easy to recreate the mecha from the series with a simple assembly. The model kit is made from PS, ABS and POM.

Its Psychic Wave and Spiral Knuckle attacks can be recreated with the use of interchangeable hand parts.

With the use of interchangeable parts, each Dan-Mechanic mecha can be recreated based on their appearance from the series.

Presenting a new plastic model kit from a collaboration between OBSOLETE and ARMORED TROOPER VOTOMS: the 1/35 RSC Armored Trooper EXOFRAME! The EXOFRAME can be created by attaching armor to the common base frame that features 28 points of articulation. The hatch on the head can be displayed opened. A pilot figure is included. Various equipment (12.7mm rifle, 7.62mm machine gun, anti-tank rocket, missile launcher) based on modern equipment is included. Water-slide decals are included. The model is made of PS plastic.

From the YouTube Originals series "OBSOLETE" by Gen Urobuchi comes 1/35 scale plastic model kits.
· The Private Military EXOFRAME
· The Improvised EXOFRAMEs that attacked the tank brigade.
· The Military Armed EXOFRAMEs used by the Outcast Brigade.
Each comes with a common base frame that utilizes 28 points of articulation. Each model also comes with a pilot miniature figure.

From the anime series "The Vision of Escaflowne" comes a plastic model kit of Dilandau's special model of Zaibach's mass produced Guymelef Alseides! The plastic model features articulated joints and deployable claws. Two variations of the Crima Claws are included for both arms. The Stealth Cloak is included in both plastic and nonwoven fabric forms. The unique Energists on both shoulders of Dilandau's Alseides have been recreated with translucent parts. The model is made of PS, ABS and POM plastic.

Claws on both arms are deployable. Two kinds of Crima Claws are included for each arm.

Both a plastic and nonwoven fabric version of the cape are included.

Display with the standard Alseides (sold separately) to create scenes of Dilandau leading the Dragon Slayers.

From the anime series "The Vision of Escaflowne" comes a plastic model kit of Zaibach's mass produced Guymelef Alseides! The plastic model features articulated joints and deployable claws. Two variations of the Crima Claws are included for both arms. The Stealth Cloak that Dragon Slayer units are equipped with is included in both plastic and nonwoven fabric forms. The Energist on its left shoulder has been recreated with translucent parts. The model is made of PS, ABS and POM plastic.

Claws on both arms are deployable. Two kinds of Crima Claws are included for each arm.

Both a plastic and nonwoven fabric version of the cape are included.

Display with Dilandau's Alseides (sold separately) to create scenes of Dilandau leading the Dragon Slayers.

From the anime series "The Vision of Escaflowne" comes a plastic model kit of the Asturian Guymelef Scherazade! The plastic model features articulated joints for easy posing. Both a plastic and nonwoven fabric cape are included. Emblems on the cape has been pre-painted, while the Energists located on its shoulders have been recreated with translucent parts. The model is made of PS, ABS and POM plastic. Kit includes sword, two kinds of hand parts and two kinds of capes.

Joints are fully articulated. The Energists on both shoulders have been recreated with translucent parts.

Both a plastic and nonwoven fabric version of the cape are included.

Display with Escaflowne (sold separately) to recreate combat scenes from the series.

This is a GOODSMILE ONLINE SHOP limited edition color plastic model kit. From "Shinkansen Henkei Robo Shinkalion" comes a MODEROID plastic model of Shinkalion E5 x Doctor Yellow. This special version features the standard Doctor Yellow plastic model parts as well as interchangeable cross combination parts. The mecha has been carefully recreated based on its appearance from the series.
The model is fully articulated and comes with Laser Scanner parts, 2 laser weapons and interchangeable large fist and open hand parts. Parts to recreate Ultra Gran Cross Firing Mode are also included. The model is made from PS and ABS plastic with POM used for some parts. The parts have been separated into green, white, yellow, light gray, gray and clear blue runners, and pre-painted parts and water-slide decals are included, making it easy to recreate the mecha from the series with a simple assembly.
*This model includes parts for recreating the cross combination with the E5 Hayabusa. MODEROID Shinkalion E5 Hayabusa cannot be built with this model kit. *This model is meant for display in Shinkalion mode. The model cannot be transformed into Shinkansen mode.

The plastic model is articulated and comes with large fist and open hand parts.

Special parts for recreating the Ultra Gran Cross firing mode are included.

The standard Doctor Yellow can be recreated with the use of interchangeable parts.

From "Shinkansen Henkei Robo Shinkalion" comes a MODEROID plastic model of Shinkalion Doctor Yellow. The model is fully articulated and comes with Laser Scanner parts and 2 laser weapons that can be displayed in either gun or sword mode. Interchangeable large fist and open hand parts are also included for recreating action scenes from the series. The model is made from PS and ABS plastic with POM used for some parts. The parts have been separated into yellow, light gray, gray and clear blue runners, and pre-painted parts and water-slide decals are included, making it easy to recreate the mecha from the series with a simple assembly.
*This model is meant for display in Shinkalion mode. The model cannot be transformed into Shinkansen mode.

Two sets of laser weapons are included and they can be displayed in either sword or gun mode.

Interchangeable scanner parts and a fist and open hand part for action scenes are included, allowing you to recreate combat scenes and its shield deployment pose.

From the anime series "Space Warrior Baldios" comes a plastic model kit of Baldios! The mecha has been carefully recreated based on its appearance from the series. The model features several points of articulation and comes with parts to recreate the combination of of Pulser Burn, Baldi Prize and Cateranger into Baldios. Pulse Sabers, the Baldi Guard Shield and Shoulder Cannons are all included.
The model kit is made from PS&ABS with POM used for some parts. The parts have been separated into 7 different colored runners and pre-painted parts, making it easy to recreate the mecha from the series with a simple assembly.

Two Pulse Sabers, Shoulder Cannons and the Baldiguard Shield are included.

The combination sequence of Pulser Burn, Cateranger and Baldi Prize can be partially recreated.

From the anime series "Mobile Police Patlabor" comes a 1/60 scale plastic model kit of the AV-X0 Type Zero! The robot has been carefully recreated based on its appearance from the series. The model features several point of articulation, and various parts like its shield, an interchangeable part for recreating its spear hand and interchangeable face open parts are all included so you can recreate all kinds of scenes. The model is made from ABS and PS plastic. Its various parts have been separated into different colored runners, and pre-painted parts and water-slide decals are included, making it easy to recreate the robot from the series with a simple assembly.

A spear hand part is included so you can recreate intense combat scenes.

Interchangeable open face head parts are included.

From the movie "ROBOCOP" comes a MODEROID plastic model of ED-209, the peacekeeping machine created by Omni Consumer Products. The model stands at around 20cm tall when completed. Its joints, pistons and slide rails are all articulated, allowing you recreated intimidating poses and comical poses alike.
The model kit is made of PS and ABS plastic with POM and PE used for some joints and features runners separated into four colors (light gray, silver, medium gray, dark gray). Wires have been used to recreate the cables connecting to its arms. Water-slide decals are included for further detailing. Preassembled joints are included, making the model easy to pose. Be sure to add it to your collection along with HAGANE WORKS ROBOCOP!

Display with HAGANE WORKS ROBOCOP (sold separately), made in the same scale.

From "Shinkansen Henkei Robo Shinkalion" comes a plastic model of Shinkalion E5 Hayabusa Mk II! The mecha has been brought to life while preserving its unique appearance from the show. It features fully articulated joints and comes with the Kaisatsu Sword and Sword Case. Additionally, Interchangeable chest area parts allow you to recreate it in Dual Gran Cross firing mode.
The model kit is made of PS and ABS plastic with POM used in some places and features runners separated into four colors (green, white, gray and gold). Some parts are pre-painted and decals are included, so all it takes is a simple assembly to recreate the mecha from the series.
*This model is meant for display in Shinkalion mode. The model cannot be transformed into Shinkansen mode.

The Kaisatsu Sword is included.
The Sword Case is included as well, so you can display it sheathed or being drawn.

Use special parts to recreate its Dual Gran Cross firing mode.

Display with E5 Hayabusa (sold separately) for an even grander display!

This is a GOODSMILE ONLINE SHOP limited edition plastic model kit. From "Shinkansen Henkei Robo Shinkalion" comes a plastic model of Black Shinkalion Kurenai! The mecha has been brought to life while preserving its unique appearance from the show. It features fully articulated joints and an openable chest area part to display it in Death Gran Cross firing mode. Two Dark Kaisatsu Swords are included.
The model kit is made of PS and ABS plastic with POM used for some joints, and features runners separated into three colors (red, gold and gray). The kit also includes decals and pre-painted parts with a special design featured on various parts like the shoulders, so all it takes is a simple assembly to recreate the mecha from the series.
*Parts for recreating Dragoon mode and Berserker mode are not included.
*This model is meant for display in Shinkalion mode. The model cannot be transformed into Shinkansen mode.

Two Dark Kaisatsu Swords are included.

Display the model in Death Gran Cross firing mode by opening its chest area parts.

Display with the E5 Hayabusa Mk II (sold separately) to recreate combat scenes!

From the YouTube Originals series "OBSOLETE" by Gen Urobuchi comes 1/35 scale plastic model kits. This plastic model kit is of the USMC AREX-03 Toad that appeared in the 1st episode of the series. The special pack includes heavy equipment, an anti-artillery laser and a radar. The EXOFRAME can be recreated by attaching armor to the common base frame that features 28 points of articulation. An anti-artillery laser, radar, a rifle, heat torch and a pilot figure are included. Water-slide decals are included. The model is made of PS plastic.

Display two EXOFRAMEs together to recreate bombardment scenes from the series.

From the YouTube Originals series "OBSOLETE" by Gen Urobuchi comes 1/35 scale plastic model kits. This plastic model kit is of the USMC AREX-03 Toad that appeared in the 1st episode of the series. The special pack includes hover equipment, a reconnaissance drone and event parts to display the EXOFRAME in storage mode. The EXOFRAME can be recreated by attaching armor to the common base frame that features 28 points of articulation. Hover parts, a drone, storage mode parts, a rifle, heat torch and a pilot figure are included. Water-slide decals are included. The model is made of PS plastic.

Articulated parts included for recreating storage mode.

From "Knight's & Magic" comes a plastic model kit of Ernesti Echavalier's mecha "Ikaruga"! The model has been faithfully recreated based on the design from the anime. The model is fully articulated, even including the four arms' Rough Fists on Ikaruga's back area. Four Sword Cannons are also included. The model is made from ABS and PS plastic with POM plastic used in some areas. The kit includes runners are separated into 3 colors (blue, gold and gray) as well as pre-painted parts, making it easy to recreate the mecha with a simple assembly. Stickers to recreate various markings are also included.

The model is fully articulated, including the four Rough Fists on its back.

The Sword Gun is included and can be displayed in open form for performing magic attacks.

Stickers are included to recreate various markings.

From "Energy Bomb Ganbaruger" comes a plastic model of Ganbaruger! The three mecha Go Tiger, Mach Eagle and King Elephant can be recreated in both Animal Mode and Fighter Mode, and can also be combined to create Ganbaruger. The model is made from ABS, PS, and POM plastic. The kit includes runners separated into 7 colors as well as pre-painted parts.

The three main mecha of the series that combine to form Ganbaruger can be recreated standalone in Animal Mode and Fighter Mode!

The plastic model can be equipped with the Ganbar Sword and Ganbar Shield.

From "Matchless Raijin-Oh" comes a plastic model of Raijin-Oh in its appearance from the "The Empire of Five Dimensions Strikes Back" novel! Ken-Oh, Ju-Oh and Ho-Oh are all included and can combine into Raijin-Oh. Same as the standard version, the kit includes runners separated into 7 colors as well as pre-painted parts. New weapons and optional parts to recreate Raijin-Oh's appearance from the novel are included. The model is made from ABS, PS, and POM plastic.
*The model of Raijin-Oh included in this kit features the same parts as MODEROID Raijin-Oh.

Special sword and ring parts are included to recreate Raijin-Oh's appearance from the novel.

Different from the standard version, certain parts of model kit are made with gold plate.

From "Shinkansen Henkei Robo Shinkalion" comes a plastic model of Black Shinkalion! The mecha has been brought to life while preserving its unique appearance from the show. It features fully articulated joints and the Dark Kaisatsu Sword! The mecha can be recreated with all of its armaments from the show, and also includes a special display stand. By combining with the Dragon, Berserker Mode and Dragoon Mode can be recreated.
The model kit is made of PS and ABS plastic with POM used for some joints, and features runners separated into three colors (dark blue, gold, gray). The kit also includes decals and pre-painted parts with a special design featured on various parts like the shoulders, so all it takes is a simple assembly to recreate the mecha from the series.
*This model is meant for display in Shinkalion mode. The model cannot be transformed into Shinkansen mode.

Recreate Normal Mode, Dragoon Mode and Berserker Mode with interchangeable parts.

All parts to recreate its various modes are included along with all armament parts that appear in the series!

From "Hades Project Zeorymer" comes the first ever plastic model of Great Zeorymer! The plastic model stands at 15cm in height to the top of the head, going up to 20cm in height when equipped with its back unit. The model kit features runners separated into different colors, and also includes decals and pre-painted parts, so all it takes is a simple assembly to recreate the mecha from the series. It's Infernal Hades and J-Kaiser attacks can be recreated. The missile hatches on its legs can be displayed opened.

"Infernal Hades!"

"J-Kaiser!"

From "Shinkansen Henkei Robo Shinkalion" comes a plastic model of Shinkalion 500 Kodama! The mecha has been brought to life while preserving its unique appearance from the show. It features fully articulated joints, and the Missile Shield and Shingo Spear are both included.

The model kit is made of PS and ABS plastic with POM used for some joints, and features runners separated into four colors (white, blue, light gray, gray). The kit also includes pre-painted parts and decals, so all it takes is a simple assembly to recreate the mecha from the series.

*This model is meant for display in Shinkalion mode. The model cannot be transformed into Shinkansen mode.

Missile Shield included.

Shingo Spear included.

Display with the E5 Hayabusa (sold separately) to recreate scenes from the anime!

From "Shinkansen Henkei Robo Shinkalion" comes a plastic model of Shinkalion 500 TYPE EVA! The mecha has been brought to life while preserving its unique appearance from the show. It features fully articulated joints, and the Missile Shield (500 TYPE EVA) and Kaisatsu Trident (500 TYPE EVA) are both included.

The model kit is made of PS and ABS plastic with POM used for some joints, and features runners separated into five colors (white, light purple, purple, red and gray). The kit also includes decals and pre-painted parts with a special design featured on various parts like the shoulders, so all it takes is a simple assembly to recreate the mecha from the series.

*This model is meant for display in Shinkalion mode. The model cannot be transformed into Shinkansen mode.

Kaisatsu Trident (500 TYPE EVA) and Missile Shield (500 TYPE EVA) included.

Display with the E5 Hayabusa (sold separately) to recreate scenes from the anime!